Availability: | |
---|---|
Quantity: | |
The single-jet meter is based on a vertical axis turbine with a single passage directing water to the turbine and another directing water from the turbine. The flow of water acts on the turbine in a paddle wheel fashion. The turbine rotation is converted to a volume reading via the gearing of the counter.
WORKING PRINCIPLE:
The water operates on the velocity principle that a jet of water enters the water meter body and drives the impeller. The impeller is suspended by hydrodynamic forces to give minimum load on the bearings. The impeller rotation is magnetically transmitted to the register which the reading is made.
APPLICATION:
This Single-jet type of speed water meter is a impeller water meter with magnetic transmission and used to measure the total quantity of cold potable water which consumed in household or a resident unit, passing through the pipeline.
FEATURES:
Single-jet Type Vane Wheel Water Meter, simple design & low cost, lower transmission resistance.
Magnetic drive,small brass body, inlet strainer, light weight.
Register in 8 digits & 1 red pointer, sealed dry dial register ensures frost resistance and keep clear reading for long time.
Register can rotate free 360° for easily reading in any position.
The impeller is the only moving parts in contact with water permitting the most reliable.
The body can be plastic painted or chrome coated, or nickel coated for optional.
Suitable for horizontal installation R80 and R100 or vertical installation R25.
For hot water up to 90℃ is available.
Plastic body, incline register 45°, external regulating device for optional.
COMPLIANCE WITH STANDARD:
Technical data conforms to ISO 4064:2015 Standard for horizontal or vertical installation.
Threaded connections comply with BSP Standard.
WORKING CONDITIONS:
Working temperature Class: T30 or T50 for cold water meter
T90 for hot water meter
Working Pressure Class: MAP10 or MAP16
Pressure Loss Class: P63
Upstream Disturbance Class: U5
Downstream Disturbance Class: D0
ACCESSORIES:
Single-jet Type Vane Wheel Water Meter will complete with 2 couplings, 2 nuts, 2 coupling gaskets and 2 spud thread protectors.
MAXIMUM PERMISSIBLE ERROR:
In the lower zone from Q1 inclusive up to but excluding Q2 is: Cold potable and hot water meter ± 5%
In the upper zone from Q2 inclusive up to and including Q4 is: Cold potable water meter ± 2%, hot water meter ± 3%
OUR SERVICE:
We provide free technical service about water meter and spare parts and application issues.
Free on-site touring and introduction of our factory.
We provide process design and validation for free.
We can guarantee on-time delivery of samples and goods.
Close follow-up of all orders by special person and keep customers informed timely.
All after-sale request will be responded in 24 hours.
The single-jet meter is based on a vertical axis turbine with a single passage directing water to the turbine and another directing water from the turbine. The flow of water acts on the turbine in a paddle wheel fashion. The turbine rotation is converted to a volume reading via the gearing of the counter.
WORKING PRINCIPLE:
The water operates on the velocity principle that a jet of water enters the water meter body and drives the impeller. The impeller is suspended by hydrodynamic forces to give minimum load on the bearings. The impeller rotation is magnetically transmitted to the register which the reading is made.
APPLICATION:
This Single-jet type of speed water meter is a impeller water meter with magnetic transmission and used to measure the total quantity of cold potable water which consumed in household or a resident unit, passing through the pipeline.
FEATURES:
Single-jet Type Vane Wheel Water Meter, simple design & low cost, lower transmission resistance.
Magnetic drive,small brass body, inlet strainer, light weight.
Register in 8 digits & 1 red pointer, sealed dry dial register ensures frost resistance and keep clear reading for long time.
Register can rotate free 360° for easily reading in any position.
The impeller is the only moving parts in contact with water permitting the most reliable.
The body can be plastic painted or chrome coated, or nickel coated for optional.
Suitable for horizontal installation R80 and R100 or vertical installation R25.
For hot water up to 90℃ is available.
Plastic body, incline register 45°, external regulating device for optional.
COMPLIANCE WITH STANDARD:
Technical data conforms to ISO 4064:2015 Standard for horizontal or vertical installation.
Threaded connections comply with BSP Standard.
WORKING CONDITIONS:
Working temperature Class: T30 or T50 for cold water meter
T90 for hot water meter
Working Pressure Class: MAP10 or MAP16
Pressure Loss Class: P63
Upstream Disturbance Class: U5
Downstream Disturbance Class: D0
ACCESSORIES:
Single-jet Type Vane Wheel Water Meter will complete with 2 couplings, 2 nuts, 2 coupling gaskets and 2 spud thread protectors.
MAXIMUM PERMISSIBLE ERROR:
In the lower zone from Q1 inclusive up to but excluding Q2 is: Cold potable and hot water meter ± 5%
In the upper zone from Q2 inclusive up to and including Q4 is: Cold potable water meter ± 2%, hot water meter ± 3%
OUR SERVICE:
We provide free technical service about water meter and spare parts and application issues.
Free on-site touring and introduction of our factory.
We provide process design and validation for free.
We can guarantee on-time delivery of samples and goods.
Close follow-up of all orders by special person and keep customers informed timely.
All after-sale request will be responded in 24 hours.